Makita DCG180RFX Bedienungsanleitung Seite 4

ENGLISH (Original instructions)
1-1. Red indicator
1-2. Button
1-3. Battery cartridge
2-1. Star marking
3-1. Speed adjusting dial
4-1. Warning lamp
SPECIFICATIONS
Stroke
Overall length
Standard battery cartridge
Net weight
• Due to our continuing program of research and development, the specifications herein are subject to change without notice.
• Specifications and battery cartridge may differ from country to country.
• Weight, with battery cartridge, according to EPTA-Procedure 01/2003
Intended use
This tool is intended for applying caulking material to
surface.
Noise
The typical A-weighted
according to EN60745:
Sound pressure level (L
Uncertainty (K) : 3 dB (A)
The noise level under working may exceed 80 dB (A)
Wear ear protection
Vibration
The vibration total
determined according to EN60745:
Vibration emission (a
Uncertainty (K) : 1.5 m/s
The declared vibration emission value has been
•
measured in accordance with the standard test
method and may be used for comparing one tool
with another.
The declared vibration emission value may also be
•
used in a preliminary assessment of exposure.
Explanation of general view
5-1. Lock lever
5-2. Switch trigger
6-1. Lamp
12-1. Rod handle
14-1. Holder cap
14-2. Rod handle
Model
Max feed force
Feed speed
with short (300 ml) holder
with long (600 ml) holder
with short (300 ml) holder
with long (600 ml) holder
with short (300 ml) holder
with long (600 ml) holder
Rated voltage
noise level determined
) : 70 dB (A) or less
pA
value (tri-axial vector
2
) : 2.5 m/s or less
h
2
DCG140
BL1415 /
BL1415N
2.0 kg
2.4 kg
D.C.14.4 V
ENE086-1
WARNING:
The vibration emission during actual use of the
•
power tool can differ from the declared emission
value depending on the ways in which the tool is
ENG905-1
used.
Be sure to identify safety measures to protect the
•
operator that are based on an estimation of
exposure in the actual conditions of use (taking
account of all parts of the operating cycle such as
the times when the tool is switched off and when it
is running idle in addition to the trigger time).
For European countries only
ENG900-1
EC Declaration of Conformity
sum)
Makita declares that the following Machine(s):
Designation of Machine:
Cordless Caulking Gun
Model No./ Type: DCG140, DCG180
Conforms to the following European Directives:
ENG901-1
2006/42/EC
They are manufactured in accordance with the following
standard or standardized documents:
EN60745
The technical file in accordance with 2006/42/EC is
available from:
Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium
4
15-1. Holder cap
17-1. Rubber ring
17-2. Nozzle
17-3. Holder cap
DCG180
5000 N
0 - 28 mm/s
214 mm
350 mm
404 mm
538 mm
BL1430 / BL1815 / BL1815N /
BL1440 BL1820
2.2 kg 2.1 kg
2.6 kg 2.5 kg
D.C.18 V
BL1830 / BL1840 /
BL1850
2.3 kg
2.7 kg
ENH101-17