General Application Instructions - HBK HBM C5 Montageanleitung

4

GENERAL APPLICATION INSTRUCTIONS

Force transducers are suitable for measuring compressive forces. They provide highly
accurate static and dynamic force measurements and must therefore be handled very
carefully. Particular care must be taken when transporting and installing the devices.
Dropping or knocking the transducer may cause permanent damage.
The permissible limits for mechanical, thermal and electrical stress are listed in sec­
tion 12 "Specifications", page 22. It is essential to take these limits into account when
planning the measuring setup, during installation and, ultimately, during operation.
C5
9
GENERAL APPLICATION INSTRUCTIONS