Mounting And Load Application - HBM PW28 Gebrauchsanleitung

Mechanical installation
4.2

Mounting and load application

Secure the load cells in the four mounting holes. A platform for load application
can be mounted on top. The screws and tightening torques to be used are
given in the table below:
Mounting
On mounting plate
For load application
1)
Recommended value for the specified property class. Please comply with the screw
manufacturer's instructions with regard to screw dimensions.
PW28 mounting at load application: 2xM6;
bolt property class 10.9; tightening torque 14 Nm
Connection for valve
coupling plug
(included among the
items supplied)
PW28 mounting:
4xM8 DIN 912;
bolt property
class 10.9;
tightening torque
25 Nm
Fig. 4.1 Load application and installation
8
Thread
M8
M6
Female connector
A05384_01_Y00_00 HBM: public
Min. property class
10.9
10.9
Direction of load
Mounting plate (not included in scope of supply)
Evenness of mounting plate <0.02 mm
Tightening torque
25 N⋅m
14 N⋅m
Platform center
Platform (not included
in scope of supply)
PW28
PW28
1)