EN
54
How to care for your dishwasher properly
• After each wash: Close the water supply and leave the door slightly open to allow
the humid air to escape.
• Unplug: Always unplug the appliance before cleaning or performing maintenance
on it.
• No solvents or abrasives: Do not use any solvents or abrasives to clean the housing
or the rubber seals. Only use a soft cloth and a little soapy water for cleaning. To
remove stains or streaks, use a damp cloth with a little vinegar or a special cleaner
for dishwashers.
• If you will not use it for a longer period of time: We recommend that you run a
programme without dishes. Then unplug the appliance, close the water supply and
leave the door slightly open so that the seals last longer and no unpleasant odours
form in the appliance.
• Move the unit: If you need to move the unit, try to keep it upright. If there is no other
way, you can also tip it onto its back.
• Door seals: One cause of unpleasant odours is food residue in the door seals.
Therefore, clean the seals regularly with a damp sponge.