Routine Maintenance - Dreame DreameBot L10s Pro Bedienungsanleitung

Routine Maintenance

EN
Dust Bin
1. Open the robot cover, then press the dust bin clip to remove
the dust bin.
2. Open the bin cover and empty the dust bin.
14
Filter
* It is recommended to clean it every 2 weeks.
1. Remove the filter and tap its basket gently.
Note: Do not attempt to clean the filter with a brush or finger.
2. Rinse the dust bin and filter with water until it is clean.
Thoroughly dry them before re-installing.
Note:
· Rinse the filter with clean water only. Do not use any detergents.
· Use the dust bin and filter only when they are completely dry.
Routine Maintenance
Mop Pad * Clean after each use.
1. Remove the mop pad from the mop pad holder.
2. Clean the mop pad with water only and leave to air dry
before re-installing.
Note: For optimal performance, it is recommended to replace the mop pad every 3
to 6 months.
Clean the Main Brush
1. Press the brush guard clips inwards to remove the brush
guard and lift the brush out of the robot.
2. Pull out the brush covers as shown in the diagram. Use the
included cleaning tool to remove any hairs tangled in the
brush.
Note: Do not pull out the hair excessively to avoid damaging the main brush when
the hair is tightly tangled in the main brush.
EN
15