Battery Recharge - Trevi KIDTAB 7 S04 Bedienungsanleitung

1. Display.
2. Frontal camera.
3. Volume buttons.
4. Power button and ON/OFF Display.
5. Return key.
6. Voice assistant.
7. Speaker.

BATTERY RECHARGE

This device uses a lithium rechargeable battery inside. Upon completion of charging, the
device will work without needing to be connected to a power outlet.
Battery charging via external power supply.
A Connect the switched off device, using the USB/ Micro USB cable, to the network
adapter included in the package;
B Connect the adapter to a power outlet. IT IS VERY IMPORTANT THIS OPERATION
IS CARRIED OUT BY AN ADULT;
C The device will display the battery icon and the charging phase for a few seconds.
At any time, by lightly pressing the Power button (4), you can check the state of charge
by checking the graphic indicator;
D When the battery icon is no longer moving (the internal indication will be complete)
disconnect the device from the power supply.
Warnings:
• Use only the supplied power supply, different power supplies could damage the battery.
• The charger is for adult use only and should be kept out of the reach of children.
• The device is charged even when it is connected to the computer with a USB cable.
• When using the device for the first time, it is advisable to fully charge the battery.
• You can use the device even when it is being charged, but, for a longer battery life,
its use is not recommended; moreover, by using the device, the charging times are
lengthened.
8. Earphone Socket 3.5mm.
9. Micro USB/ DC socket: connect the unit
to 5V adaptor/ connect the unit to PC.
10. Micro SD CARD slot.
11. Reset hole.
12. Rear camera.
13. Bracket.
16