Information Regarding Inaccurate Measurement Results - Parkside PMML 5 A2 Bedienungs- Und Sicherheitshinweise

Information
regarding inaccurate
measurement results
Please note that inaccurate measure-
ment results can be obtained under
certain conditions. The following
conditions can cause inaccurate
measurement results:
– very thick walls
– weak batteries
– deep-lying AC wires or pipes
– shielded AC wires
– thick walls with thin pipes or AC wires
– metal-clad walls
– very damp conditions
Using this product you cannot detect
AC wires in an electric circuit
– that are insulated from the mains
power supply.
– that have a direct current flowing
through them.
– that are used for computer or
telecommunication systems.
This product is only suitable for
detecting metal pipes. You cannot
GB/IE/NI 17