Safety Instructions - Marmitek Connect 621 UHD 2.0 Gebrauchsanleitung

2 Safety instructions

x
Please read these instructions thoroughly before you use the device and keep
them for future reference.
x
Only for indoor use.
x
Do not use the product in a damp environment or near water.
x
Do not expose the product to extremely high or low temperatures, strong light
sources or direct sunlight.
x
This product is not a toy. Keep out of reach of children.
x
Do not open the product (battery panel is an exception): the device may contain
live parts.
x
Keep batteries out of the reach of children. Dispose of batteries as chemical
waste. Never use old and new batteries or different types of batteries together.
Remove the batteries when you are not using the system for a longer period of
time. Check the polarity (+/-) of the batteries when inserting them in the product.
Wrong positioning can cause an explosion.
x
Connect the adapter to the mains only after you have verified that the line voltage
corresponds to the value specified on the type plates.
x
Never connect a power adapter if it's damaged. In such cases, please contact
your supplier.
x
Repairs or service should only be performed by qualified personnel.
x
Disconnect the AC/DC power adapter from the mains when this device is not in
use for prolonged time.
x
Improper use, self-installed modifications or repairs will void any and all
warranties.
x
Marmitek does not accept any product responsibility for incorrect use of the
product or use other than for which the product is intended.
x
Marmitek does not accept liability for any consequential damage other than the
legal product responsibility.
4
© MARMITEK