Yamaha RX-V557 Bedienungsanleitung Seite 31

Notes
• Some 6.1-channel compatible discs do not have a signal (flag)
which this unit can automatically detect. When playing these
kinds of discs with 6.1-channel, select a decoder manually
(PLIIx Music, EX/ES or EX).
• 6.1-channel playback is not possible even if EXTD SUR. is
pressed in the following cases:
– When "SUR. LR" (see page 50) or "SUR. B" (see page 50) is
set to NONE.
– When the source connected to the MULTI CH INPUT jack is
being played.
– When the source being played does not contain surround left
and right channel signals.
– When a Dolby Digital KARAOKE source is being played.
– When "2ch Stereo" or "Direct Stereo" is selected.
• When the power of this unit is turned off, this setting will be
reset to AUTO.
• The Pro Logic IIx decoder is not available when "SUR. B" is set
to NONE (see page 50).
Enjoying 2-channel software in surround
Signals input from 2-channel sources can also be played
back on multiple channels.
Press AMP to select the AMP mode, then press
STANDARD on the remote control to switch
between the SUR. STANDARD and SUR.
ENHANCED programs.
AMP
Or press MOVIE to select the MOVIE THEATER
program.
MOVIE
Press SELECT on the remote control to select
the decoder.
SELECT
You can select from the following modes depending on the
type of software you are playing and your personal
preference.
STANDARD
5
4
6
When you select the SUR. STANDARD program:
PRO LOGIC
Dolby Pro Logic processing for any sources.
PLII Movie
Dolby Pro Logic II processing for movie software.
PLII Music
Dolby Pro Logic II processing for music software.
PLII Game
Dolby Pro Logic II processing for game software.
PLIIx Movie
Dolby Pro Logic IIx processing for movie software.
PLIIx Music
Dolby Pro Logic IIx processing for music software.
PLIIx Game
Dolby Pro Logic IIx processing for game software.
Neo:6 Cinema
DTS processing for movie software.
Neo:6 Music
DTS processing for music software.
When you select the SUR. ENHANCED or MOVIE
THEATER program:
PRO LOGIC
Dolby Pro Logic processing for any sources.
PLII Movie
Dolby Pro Logic II processing for movie software.
PLIIx Movie
Dolby Pro Logic IIx processing for movie software.
Neo:6 Cinema
DTS processing for movie software.
y
You can also select a decoder by pressing j / i on the remote
control when the decoder type is displayed in the front panel
display.
Note
The Pro Logic IIx decoder is not available when "SUR. B" is set
to NONE (see page 50).
PLAYBACK
29