Transport; Seat Belt (Option) - Handicare winner Bedienungsanleitung

Operation
Use caution when folding down the steering column, to avoid
getting your fingers jammed.
4.7

Transport

To be able to easily transport the Winner scooter in a vehicle suitable for this purpose,
the Winner can be reduced. This way, it will take up a lot less space. See 'Reducing'.
The scooter can now be placed in a car. The best way to do this is by using steel
planking, across which to push the scooter into the car.
The scooter may also be lifted, but this requires at least two strong persons.
•
Never lift the scooter by its plastic cover.
•
Considering the nature of the scooter, the user is supposed to
make a transfer to a regular car seat. You may not be
transported in a car or taxi while sitting on the scooter, even if
the vehicle concerned has been adapted for the transport of
scooters. The reason is that the Winner cannot offer the safety
that is offered by standard car seats, no matter how well the
Winner is fixed to the vehicle concerned.
•
After the scooter has been placed inside the car, you must make
sure that the scooter is not in the neutral position.
•
The scooter must be secured with lashing straps to the front and
the back.
•
Note that the disassembled seat can cause damage as a result
of car movements.
•
The seat leg may be greasy.
4.8

Seat belt (option)

The seat belt may be mounted by the dealer to the bottom of the seat, as a standard
option.
The seat belt should be mounted as follows:
•
On both sides of the seat, look for the threaded mounting holes of the hinge.
•
Clear these holes.
•
On both sides of the hinges, mount the mounting plates of the seat belt. Fasten these
using a bolt.
34