Attaching The Lower Vent Hole Assembly; Attaching The Decorative Parts - Fulgor Milano FBCD 761 TNF EDBL Anleitung Zur Installation

Attaching the lower vent hole assembly

• Use 2 screws to attach the lower vent hole part.
IMPORTANT INFORMATION
You can move the lower vent hole forward-backward to
adjust it to the kick plate in the kitchen.
WARNING
Forward-backward travel distance of the lower kick plate
must be 15/16" (23 mm). As you can see in the figure, the
decorative kick plate must not be in front of the upper vent
hole level.

Attaching the decorative parts

• Attach the side closing parts (1) onto the right/left connection
brackets.
• Attach the upper closing part (4) onto the upper connection
bracket.
EN
25