IKEA TALLBODA Bedienungsanleitung Seite 29

9. TROUBLESHOOTING
FAULT
The programme does
not start.
Water remains inside
the machine.
Machine stops during
washing.
Shaking and hitting
noises are heard
during a wash
operation.
POSSIBLE CAUSE
Your Dishwasher is not plugged in.
Your Dishwasher is not switched
on.
Fuse blown.
Water inlet tap is closed.
Your Dishwasher door is open.
Water inlet hose and machine
filters are clogged.
Water drain hose is clogged or
twisted.
The filters are clogged.
The programme is not finished
yet.
Power failure.
Water inlet failure.
The spray arm is hitting the dishes
in the lower basket.
GB - 24
TROUBLESHOOTING
Plug your Dishwasher in.
Switch your Dishwasher on by pressing
the On/Off button.
Check your indoor fuses.
Turn on the water inlet tap.
Close the Dishwasher door.
Check the water inlet hose and machine
filters and make sure they are not
clogged.
Check the drain hose, then either clean
or untwist it.
Clean the filters.
Wait until the programme is finished.
Check mains power.
Check water tap.
Move or remove items blocking the spray
arm.