An introduction to your new
EN
Microchip Cat Flap
1
What's in the box?
Please make sure you have all these parts:
A
Cat Flap
2
Installing the batteries
Remove the battery cover from the front
A
of the cat flap.
3
How the cat flap works
In standard operating
A
mode the cat flap is
locked from the outside.
4
Manual locking modes
Position 1
A
Enter and exit
5
Programming your cat flap
Press and hold the 'Add a Pet' button for
1 second. The light will flash red and the
A
catch will drop. The cat flap is now ready
to learn your cat's microchip.
1
B
External Frame
The cat flap unlocks when
it detects your authorised
B
cat's microchip or collar
tag as its head enters
the tunnel.
Position 2
B
Exit only
C
2 x Screw Caps
Insert the batteries making sure the - and +
B
symbols are the correct way round.
Position 3
C
Enter only
Encourage your pet to put its head into
the tunnel of the cat flap. The catch will
raise (this can be heard) once the pet's
B
microchip is recognised. Repeat this
procedure separately for all pets using
the cat flap, do not try to add multiple
pets at once.
3 pairs of screws
D
(select the best length
for your installation)
Once your cat has fully
C
entered the house, the
cat flap will lock again.
Position 4
D
Fully locked