Merax EX287226AAA Benutzerhandbuch Seite 36

Commissioning via the App
1. Install the "Smart Life"
2. Activate the WIFI function in the settings of your appliance.
3. Place the appliance at a distance of about 5 meters to your router.
4. As long as the power is turned on, the WIFI indicator flashes slowly. After 3 minutes, the status
will be canceled if there is no network configuration, and the indicator light is off. If you need to re-
connect the WIFI, long press the "timer" button for 5 Second to start the network configuration, the
WIFI indicator flashes slowly.
5. When WIFI indicator flashes slowly, select "Add Device"- "Large Home Appliances"- "Portable
Air Conditioner", and follow the instructions on the display. Select "AP Mode" on upper right of the
app, choose "Confirm indicator slowly blink" and press "Go to Connect" to connect the WIFI named
"Smart Life-XXXX".
6. Once the appliance has been successfully connected, the WIFI lamp lights up. Now you can
operate the appliance using the app.
7. Press and hold the Timer button for about 5 seconds, the appliance disconnects, the WIFI lamp
lights off.
TROUBLE SHOOTING
Network connection failed
Network connection timeout
WIFI indicator off
WIFI hotspot disappear and the
WIFI light flash
5.4.3. TIMER SETTING (1hour-24hours):
The timer has two ways of operation:
To turn off
(When power on)
To turn on
(When power off)
app. Create a user account.
Solution
1.Check if you select the WIFI named "Smart Life-XXXX".
2.Turn off the machine and unplug the power code and plug
in after 10 seconds, enter the App to connect again.
Long press the "Timer" button or turn off the machine and
unplug the power cord and plug in after 10 seconds.
Turn off the machine and unplug the power cord and plug in
after 10 seconds, enter the App to connect again.
Press Timer key to turn on the
timer function.
Press Timer key to turn on the
timer function.
Press UP/DOWN repeatedly to
set the delay OFF time.
Press UP/DOWN repeatedly to
set the delay ON time.
36