Fevac Two Connections; Power Supply Connection - Bose FeVac One Evacuation System Controller Installationsanleitung

3.4 FeVac Two connections
®

3.5 Power supply connection

Connect the FeVac One unit to the FeVac Two unit using the PATCH 8 cable (8 core twisted pair CAT5).
If several FeVac Two units are used, use the second PATCH 8 connection socket on the FeVac Two unit
to connect it to the next FeVac Two unit and so on unitl the different FeVac Two units are all connected
to each other. The maximum length of all patch ccables may not exceed 10 meters.
First ensure that your mains supply voltage is the same as the voltage shown on the rear of the unit.
Connect the FeVac One unit to the mains power supply.
11