Changing Access Codes - Siemens Bewacom BM3 Bedienungshandbuch

BM3 Installation & User Manual

Changing access codes

1 Set Bewacom to programming mode.
2 Enter the access code to change.
3 Enter the new access code.
4 Enter the new access code again.
5 To only change the code – without changing
the time control group – press B now.
If the code is not timed, press 0.
If the is timed, select the desired input (see
below).
1 = the code can be timed from a time clock
connected to input 1.
2 = the code can be timed from a time clock
connected to input 2.
Also see the wiring diagram.
6 Follow steps 2-5 to change the next code.
7 Press B to exit programming.
17