Sony Bravia KDF-E50A11E Bedienungsanleitung Seite 39

To connect
"PlayStation 2",
DVD player or
decoder D
DVD recorder or
VCR that supports
SmartLink E
DVD player with
component output
F
Digital satellite
receiver
G
CAM (Conditional
Access Module)
H
For encripted PPV
(Pay per View)
services.
Notes:
• Switch off the TV before inserting the CAM.
• Keep always the dummy card into the CAM slot when
you remove the CAM.
Modem connector
I
Hi-Fi audio
equipment J
Downloaded From TV-Manual.com Manuals
Do this
Connect to the scart socket
1. When you connect the
decoder, the scrambled signal from
the TV tuner is output to the
decoder, then the unscrambled
signal is output from the decoder.
Connect to the scart socket
2. SmartLink is a direct link
between the TV and a VCR/DVD
recorder. For more information on
SmartLink, refer to the instruction
manual supplied with your VCR or
DVD recorder.
Connect to the component socket
3 and the audio sockets
The component signal containing
576p signal format and audio
signal are input from the DVD
player.
Connect only to the HDMI IN 6
socket. The digital video and audio
signals are input from the digital
satellite receiver. If the digital
satellite receiver has a DVI socket
and not an HDMI socket, connect
the DVI socket to the HDMI IN 6
socket, and connect the audio
socket to the audio sockets HDMI
IN 6. The digital video and
analogue audio signals are input
from the digital satellite receiver.
Remove the dummy card from the
CAM slot and insert the CAM.
Insert the viewing card into the
CAM.
For future use only.
Connect to the audio output
sockets to listen to the sound
from the TV on Hi-Fi audio
equipment. To turn off the sound
of the TV speakers, set "Speaker"
to "Off" (page 26).
/
/
3.
Continued
39
GB