Outlet, Buffer Vessel - Condenser - Heidolph Hei-VOLUME Distimatic Pro Aufbauanleitung

Assembly
Outlet, buffer vessel – condenser
Preferably carry out this step BEFORE positioning the valve matrix
on the rotary evaporator:
➜ Cut a piece of tube approx. 65 cm long (PTFE, transparent, sold by the meter,
included).
➜ Dismantle the tube connector [2] from the condenser, insert the tube end into the
tube connector and screw the tube connector back onto the condenser [3].
➜
Connect the tube end to the unused outlet of the buffer vessel [1].
86