Permanent mode
The light only turns on or off on command by pressing button C on the control panel or by using the
switch in your Vinotag application.
Automatique mode
The light turns on automatically when the door is opened, and turns off automatically after a time
delay of 15 minutes. This lighting mode cannot be controlled by the app.
Check the actual temperature
To consult the actual temperature of your cellar; press and hold the "D" and "E" keys simultaneously
for 3 seconds; the actual temperature is displayed flashing. The set temperature is displayed again
when you release the buttons.
Energy saving
After 20 seconds without operation, the screen will enter power saving mode and become darker but
still visible.
Connection to a WIFI network
Use your mobile phone to connect the cellar to a WIFI network.
Open the Vinotag application and create a digital cellar by selecting:
"Connected Cellar" and choose, from the list provided, the reference of your
Apogée cellar.
If you already have a Vinotag account, go to the "MY ACCOUNT" space then
click on "ADD A CELLAR" by selecting: "Connected Cellar" and choose, from
the proposed list, the reference of your Apogée cellar.
The application will connect to your physical cellar, which must be powered by a mains socket and be
correctly installed (refer to the installation instructions for your cellar). Once your physical cellar has
been detected by the application, the available WIFI networks are displayed, select the WIFI network
of your choice, or indicate the name of your WIFI network if it is not displayed automatically and enter
the password. access (network password) to connect your cellar to the network and adjust its settings
remotely.
The "K" icon of the cellar is displayed fixed indicating that the WIFI function is on and the cellar is
connected to WIFI.
ENGLISH
47