Switch Between Fahrenheit F And Degrees Celsius °C - Bio Green THERMO 2 Installations- Und Gebrauchsanweisungen

Thermo 2 Operating Instructions / Bruksanvisningen
4.4 Switch between Fahrenheit F and degrees Celsius °C
To choose between Fahrenheit F and degrees Celsius, press the button
shown on the display differs from the temperature measured at the sensor (actual temperature not equal to set
temperature). The set temperature now starts to flash. While the set temperature is flashing, press the
"Heat/Cool" button
Fahrenheit F or vice versa and starts flashing (depending on which unit was already set). Do not press
anything while the unit (F or °C) is flashing. Wait until the unit stops flashing. The unit is now selected.
4.5 Operating states (meaning of the LEDs
The LEDs at the top of the Thermo 2 indicate which mode the Thermo 2 is in (heating or cooling mode and
whether the set temperature is the same as the measured temperature).
red
A
A
From
From
Display shows "EE" with signal
tone
Example cooling:
You want to achieve a temperature of 21°C in a room. It is summer and you connect a fan to the
Thermo 2 (must be purchased separately). When you switch on the Thermo 2, the sensor measures
a temperature of 25°C in the room. You set the temperature of the Thermo 2 by
the buttons
The Thermo 2 lights up yellow and green and activates the fan. This runs until the temperature of
21°C is reached in the room. The yellow lamp goes out and only the green LED lights up.
BioGreen GmbH | Marburger Str. 1b | 35649 Bischoffen-Oberweidbach
for approx. 3 seconds. The display now switches between degrees Celsius °C to
LED's
yellow
From
A
From
A
to set a temperature of 21°C. To do this, select the Cooling mode .
Operating status
Green
Heating" mode selected/
From
Setpoint temperature reached/
heating mode off
Heating" mode selected/
From Setpoint temperature not reached/
heating mode on
Cooling" mode selected/
Setpoint temperature reached/
cooling mode off
A
Cooling" mode selected/
Setpoint temperature not reached/
cooling mode on
A
Interrupted working circuit
or short circuit or temperature
above 99°C / heating mode off
19
or so that the temperature
EN