Ttl: Fully Automatic Wireless Flash Shooting - Godox V1S Benutzerhandbuch

TTL: Fully Automatic Wireless Flash Shooting

Using Automatic Wireless Flash with a Single Receiver Unit
Transmitter Unit Setting
Attach a V1S camera flash on the camera and set it as the Transmitter unit.
•
M/A/B/C can be set to TTL separately.
•
Receiver Unit Setting
Set the other camera flash as the wireless Receiver Unit
•
Check the communication channel.
If the Transmitter unit Receiver unit(s) are set to a different channel, set them to
•
the same channel.
Position the camera and flashes
Position the camera and flashes as the picture shows.
•
Check that the flash is ready
Check that the Transmitter flash ready indicator is lightened.
•
Check the flash operation.
Press the Transmitter unit's Test Button < >
•
Then, the Receiver unit will fire. If not, adjust the Receiver unit's angle toward the
•
Transmitter unit and distance from the Transmitter unit
23