Qualified Personnel For Applications In Hazardous Areas; Delivery - Siemens SIPROCESS GA700 Kompaktbetriebsanleitung

Introduction

1.6 Qualified personnel for applications in hazardous areas

1.6 Qualified personnel for applications in hazardous areas
Persons who install, connect, commission, operate, service, maintain and dismantle the
device in a hazardous area must have the following specific qualifications:
● They are authorized, trained or instructed in operating and maintaining devices and
systems according to the safety regulations for electrical circuits, high pressures and
aggressive as well as hazardous media.
● They are authorized and trained or instructed in carrying out work on electrical circuits for
hazardous systems.
● They are trained or instructed in maintenance and use of appropriate safety equipment
according to the pertinent safety regulations.
1.7

Delivery

Damaged or incomplete device
Danger of explosion in hazardous areas
The use of damaged or incomplete devices can lead to an explosion.
• Do not use damaged or incomplete devices.
Checking delivery
1. Check the packaging and the device for visible damage caused by inappropriate handling
during shipping.
2. Report any claims for damages immediately to the shipping company.
3. Retain the damaged parts for clarification.
4. Check the scope of delivery for correctness and completeness on the basis of the
delivery note. Compare the serial numbers on the delivery note with the serial numbers
on the basic device or on the modules.
5. Check whether the package includes the following items:
– "Manual Collection" CD-ROM
– This printed copy of the Compact Operating Instructions
12
WARNING
Devices in explosion-proof design
Compact Operating Instructions, 11/2019, A5E35134047-04