EUROM Mon Soleil Wi-Fi 350 Bedienungsanleitung Seite 39

Remove all week timer settings for a specific day
1. Press and hold the WEEK button until UU appears and flashes on the display.
2. Press the SET button; ON/OFF appears on the display.
3. Press the SET button; 01/99 appears on the display.
4. Press the SET button; U1 appears on the display.
5. Press the Plus or Minus button to select the desired day, from 1 (Monday) to 7 (Sunday).
6. Press the Cancel button to erase all timer settings for the selected day.
Remove a specific timer setting
1. Press and hold the WEEK button until UU appears and flashes on the display.
2. Press the SET button; ON/OFF appears on the display.
3. Press the SET button; 01/99 appears on the display.
4. Press the SET button; U1 appears on the display.
5. Press the Plus or Minus button to select the desired day, from 1 (Monday) to 7 (Sunday).
6. Press the Edit button.
7. Press the Plus or Minus button to select the desired timer setting, from 1 to 4.
8. Press the Cancel button to erase the selected timer setting.
Check the timer settings
1. Make sure the heating indicator is visible. The device should be heating.
2. Press the WEEK button briefly and repeatedly to check:
•
timer ON or timer OFF;
•
once only (01) or endlessly (99);
•
U1-U7, day of the week;
•
timer setting number of the day concerned (1, 2, 3 or 4);
•
set temperature;
•
start time in hours;
•
stop time in hours;
•
this is repeated for the next timer setting.
All 28 timer settings are shown, also the timer settings that have not been filled. The
temperature of the non-filled timer settings is 20 °C.
Eurom Smart App
CAUTION
Timer setting made with the remote control are not visible in the Eurom Smart
App and timer settings made with the app are not visible on the device. As
soon as the Eurom Smart App is used, the remote control can no longer be
used to make new timer settings. The Eurom Smart App automatically updates
the time.
39