Tips And Tricks - Parkside PFBS 12 B6 Originalbetriebsanleitung

Function
Cleaning
Grinding
Cutting
■ The maximum diameter of the assembled grinding bodies, grinding cones, pencil
grinders with a thread insert may not exceed 55 mm . The maximum diameter of sand-
paper grinding accessories may not exceed 80 mm .
NOTE
► The max . permissible length of a mandrel is 33 mm .
■ Store the accessories in the original box or store the accessory components somewhere
else to protect them from damage .
■ Store the accessories somewhere dry and not in the vicinity of aggressive media .

Tips and tricks

■ If you exert too much pressure, the fitted tool can break and/or the workpiece could be
damaged . You will achieve optimum working results by moving the tool over the work-
piece at a steady speed and while exerting light pressure .
■ When carrying out cutting work, hold the appliance firmly with both hands .
■ Observe the data and the information in the table to prevent the end of the spindle from
touching the perforated base of the grinding tool .
│ GB │ CY
■ 14
Accessories Use
e .g . cleaning hard-to-access
Synthetic
plastic housings or the area
brushes
around a door lock
Grinding Grinding work on stone,
discs wood, fine work on hard
materials such as ceramics
Grinding bits
or alloyed steel
Working metal, plastic and
Cutting discs
wood
Protrusion mm
(min–max)
9–15
12–18
10
12–18
PFBS 12 B6