SPORTSTECH ESX600 Benutzerhandbuch Seite 38

Step 4:
Sub-step 1:
Fasten the handlebar (12) to the handlebar
column and guide the associated handlebar
cable (14) through the circuit board as shown
in Figure 1.
Sub-step 2:
To attach the handlebar, place the movable
cover cap (4) at the point where the handlebar
(12) is mounted on the handlebar column.
Now attach a washer (5) and a spring washer
(6) and tighten the T-button sleeve (7) clockwi-
se using the T-button (8) provided. The hand-
lebar (12) should now be firmly attached and
wobble-free.
38