Safety instructions
I
NOTE
Supplementary information for operating the product.
2
Safety instructions
D
DANGER! Failure to obey these warnings will result in death or
serious injury.
Electrocution hazard
On boats: If the device is powered by the mains, ensure that the
power supply has a residual current circuit breaker.
Do not touch exposed cables with your bare hands. This applies
especially when operating the device from the AC mains.
Before starting the device, ensure that the power supply line and
the plug are dry.
!
WARNING! Failure to obey these warnings could result in death
or serious injury.
Electrocution hazard
Do not operate the cooling device if it is visibly damaged.
If this cooling device's power cable is damaged, it must be
replaced to prevent safety hazards.
This cooling device may only be repaired by qualified personnel.
Improper repairs can lead to considerable hazards.
Plug the device to sockets that ensure proper connection espe-
cially when the device needs to be earthed.
Fire hazard
When positioning the device, ensure the supply cord is not
trapped or damaged.
Do not locate multiple portable socket-outlets or portable power
supplies at the rear of the device.
Keep the ventilation openings on the device housing or in instal-
lations free of obstructions.
Do not use any mechanical objects or other means to speed up
the defrosting process, unless they have been recommended by
the manufacturer for this purpose.
6
MCF32, MCF40, MRF 40, MCF60 AC/DC
EN