Inhaltsverzeichnis
Werbung
GB
52
ANGLE GRINDER
The numbers in the following text refer to the
drawing on page 2 - 4.
Read this operators guide carefully,
before using the machine. Ensure that
you know how the machine works, and
how it should be operated. Maintain the
machine in accordance with the
instructions, and make certain that the
machine functions correctly. Keep this
operator's guide and other enclosed
documentation with the machine.
Introduction
This machine is developed for grinding and
roughing of metal and stone. With help of the
correct accessories the machine can also be
used for brushing and sanding.
Contents
1. Machine data
2. Safety instructions
3. Assembly
4. Use
5. Service & maintenance
1. MACHINE DATA
Technical specification
Voltage
Frequency
Power input
No-load speed
Disc diameter
Spindle dimension
Weight
Lpa (sound pressure)
Lwa (sound power)
Vibration value
Contents of packing
1 Angle grinder
1 Side handle
1 Spanner
1 Set carbon brushes
1 Instruction manual
1 Safety instructions
1 Warranty card
Ferm
Ferm
Check the machine, loose parts and accessories
for transport damage.
Features
Fig. 1
1. On/off switch
2. Guard
3. Side handle
4. Grinding disc
5. Spindle lock
2. SAFETY INSTRUCTIONS
In this manual and/or on the machine the
following symbols are used:
Denotes risk of personal injury, loss of
life or damage to the tool in case of
non-observance of the instructions in
this manual.
Indicates electrical shock hazard.
Immediately unplug the plug from the
mains electricity in the case that the
cord gets damaged and during
maintenance.
Risk of fire.
Use spindle lock only in stand still
mode.
230 V~
50 Hz
Keep bystanders away.
750 W
11000/min
115 mm
M 14
2.15 kg
Wear ear and eye protection.
86.9 dB (A)
99.9 dB (A)
0.473 m/s
2
Wear protective gloves.
Special safety instructions
•
Check that the maximum speed indicated on the
grinding disc corresponds to the maximum
speed of the machine. The speed of the machine
must not exceed the value on the grinding disc.
•
Make sure that the dimensions of the grinding
disc correspond to the specifications of the
machine.
GB
05
Werbung
Inhaltsverzeichnis
