Notes On Safety; Symbols And Icons - Parkside PTSG 140 C2 Originalbetriebsanleitung

GB NI CY
The specifi ed total vibration value and the
stated specifi ed noise emission value can
also be used for a provisional assessment
of the load.
The vibration and noise emissions may
deviate from the specifi ed values during
actual use of the power tool, depending on
how the power tool is being used and, in
particular, what kind of material is being
worked on.
Safety measures for the protection of the
operator are to be determined that are ba-
sed on an estimate of the actual vibration
load under the real operating conditions
(for this, all parts of the operating cycle
are to be taken into account, for example,
times in which the electric tool is turned off,
and those during which it is turned on but
running without a load).

Notes on safety

CAUTION! When using power
tools, observe the following basic
safety measures for the prevention
of electric shocks and the risk of
injury and fi re.
Please read all these instructions
before using this electric tool and
please keep the safety instructions.

Symbols and icons

Symbols on the device:
Warning!
Read the manual!
Warning! Electric shock hazard.
Always unplug the device before
working on it.
6
Wear eye and hearing protection
Wear respiratory protection.
Wear safety gloves.
Protection class II
(double insulation)
Sanding disc direction
of rotation
Electrical machines do not belong
with domestic waste
Producer
UKCA mark indicates conformi-
ty with relevant Great Britain re-
gulations applicable for the pro-
duct.
Symbols used in the instructions:
Hazard symbols with in-
formation on prevention of
personal injury and property
damage.
Precaution symbol with information
on prevention of harm / damage.
Connect the machine to the power
supply.
Pull out the mains plug.
Notice symbol with information on
how to handle the device properly.