Function And Device Overview - eQ-3 homematic IP HmIP-BSM-I Installations- Und Bedienungsanleitung

operating manual does not fall within the scope of intended use and will
invalidate any warranty or liability.
3

Function and device overview

The Homematic IP Switch Module for brand switches is suitable for in-
stallation in a flush-mounting box for switches from a wide range of man-
ufacturers. Once installed, the device switches a connected load (e.g. a
lamp) on and off and measures the energy consumption.
The Switch Module enables connected loads to be easily controlled us-
ing the switch's push-button rocker, via wireless remote control or the
Homematic IP app.
Using the app, you can always get an overview of the energy consump-
tion and costs of connected loads.
The adapters for different switches allow you to replace switches made
by popular manufacturers with an intelligent Homematic IP installation.
Using existing or planned switches and cabling reduces the cost of instal-
lation to a minimum. The design, colour and finish of switches that have
already been installed does not change, since existing frames and rockers
can continue to be used.
Device overview (see figure 1):
(A) System button (pairing button and LED)
(B) Connecting terminal for 2 (lamp/corresponding supply cable (nor-
mally open))
(C) Connecting terminal for 1 (corresponding supply cable (normally
closed))
(D) Connecting terminal for N (neutral conductor)
(E) Connecting terminal L (phase conductor)
Function and device overview
31