Werbung
Verfügbare Sprachen
Verfügbare Sprachen
6.Operation
(1) Guide for operation
(2)Start the pool heat pump
Press
to start the heat pump, the LED display will show the inlet water temperature and current working
mode after 5s.
(3) Stop the pool heat pump
Press
once again to stop the heat pump, the LED display shows 'OFF'
(4) Water temperature setting
Press
or
to set the desired water in temperature in current working mode, then Press
to save
setting and exit.
(5)TIME setting
Press
button ,then press
to enter into " TIME " display ;
** HOUR SETTING**
Press
again to "HOUR" setting , "HH" flashed ,then press
or
to adjust the HOUR from 0 to 23 ;
**MINUTE SETTING**
Press
to enter into MINUTE setting ,"MM" flashed , then press
or
to adjust the MINUTE from 0 to
59.
(6) TIMER ON Setting
Press
button ,then press
button twice to enter into TIMER ON setting .When you see the starting time
40
Werbung
