IMG STAGE LINE MINIZOOM-712 Bedienungsanleitung Seite 15

Reset
(reset of motor control)
All rights reserved by MONACOR
in any form or by any means for any commercial use.
(keep pressed until 000 briefly appears on the display)
The submenu can only be called up via P018.
INTERNATIONAL GmbH & Co. KG. No part of this instruction manual may be reproduced
®
Calibration
press ENTER
Resetting the menu settings
to confirm
press ENTER
Turning the display indication by 180°
to confirm
press ENTER
Inverting the tilt direction
to confirm
press ENTER
Inverting the pan direction
to confirm
press ENTER
Music control
to confirm
press ENTER
Show programs 1 ― 8
to confirm
press ENTER
Master or slave mode
to confirm
press ENTER
Pan / tilt speed
to confirm
press ENTER
Number of channels
to confirm
press ENTER
DMX start address
to confirm
Subject to technical modification.
Starting position
press ENTER
Zoom
to confirm
Starting position
press ENTER
to confirm Tilt
Starting position
press ENTER
Pan
to confirm
Reset of values
to 000
15