Startup / Operation - BOMANN KG 7342 Bedienungsanleitung, Garantie

• Remove the hinge cover as well as the opposite
blind cap and dismount the upper door hinge.
• Lift out the fridge door; remove the door stopper
on the door underside and attach the delivered
door stopper to the corresponding other door un-
derside.
• Move the blind plug on the door topside and set
the door safely aside.
• Remove the middle door hinge. Lift out the freez-
er door; remove the door stopper on the door un-
derside and attach the delivered door stopper to
the corresponding other door underside.
• Move the blind plug on the door topside and set
the door safely aside.
• Tilt the appliances slightly backwards and block it
in this position. Unscrew the feet and dismount
the lower door hinge.
• Transfer and attach the lower door hinge to the
opposite unit side; after you have unscrewed the
hinge pin and inserted it from the other side of the
hinge. Screw in the feet accordingly.
• Put the appliance back in the upright position.
Move the blind plugs to the exposed holes of the
middle door hinge.
• Put on the freezer door and fix it in the intended
position.
• Rotate the middle door hinge by 180°, move and
fasten it on the opposite unit side.
• Put on the fridge door and fix it in the intended
position.
• Transfer and fasten the upper door hinge on the
opposite unit side.
• Put on the blind cap and hinge cover you re-
moved at the beginning.
• Check the door rubber seal for an exact fit and, if
necessary, bring it into the correct position.
Check that the doors are aligned vertically and hori-
zontally to ensure proper opening and closing of the
doors.

Startup / Operation

Prior to first use
CAUTION:
After transport, the appliance should be left standing
upright for four hours before connecting to the power
supply. Nonobservance could lead to malfunction of
the cooling system and causes an appliance break-
down.
Clean the appliance interior including all accessory
parts. Consider the instructions which we provide in
"Cleaning and Maintenance".
the chapter
Starting the appliance
• Connect the appliance to the power supply.
• Set the operating conditions. See also the follow-
ing sections.
Settings
Position [ 0 ] means that the appliance is in the
switched-off state. Turn the temperature control
clockwise from this position, the appliance switches
on automatically.
The power levels control the different values of the
internal temperature.
24