Ecler CA200Z Bedienungsanleitung Seite 49

REMOTE_SELECTO <Rem Select
R Value>
IR_REMOTE ON/OFF
DISPLAY_MODE <Display Mode>
LCD_CONTRAST <Contrast Level>
AUTO_STANDBY ON/OFF
AUTOLOAD_PRES ON/OFF
ET1
PANEL_LOCKED ON/OFF
INFO_MODEL <Device Model>
INFO_VERSION <Firmware
Version>
DAM514
TYPE PARAM1
GET ALL
INFO_MODEL
INFO_VERSION
AUTOLOAD_PRESET1
PRESET_NUMBER
PRESET_NAME
REMOTE_MODE
REMOTE_INPUTS
REMOTE_ZONES
<Zone>
PARAM2 PARAM3
<Preset=P1:P20>
<Preset=T1:T6>
<Remote=R1:R4>
<Remote=R1:R4>
<Remote=R1:R4>
Shows de current REMOTE SELECTOR function for the specified ZONE
Shows the current IR REMOTE status (ON or OFF)
Shows the current DISPLAY MODE
Shows the current DISPLAY CONTRAST level
Shows the current AUTO STANDBY function status (ON or OFF)
Shows the current AUTOLOAD_PRESET1 at Startup function
Shows the current PANEL_LOCKED (front panel controls) status
Shows the Device model name
Shows the current Firmware Version
PARAM DESCRIPCIÓN
4
Dumps current device status (with DATA messages)
Gets the Device model name
Gets the current Firmware Version
Gets the current AUTOLOAD_PRESET1 at Startup function
Gets the current PRESET number
Gets a certain PRESET (from P1 to P20) or TEMPLATE (from T1 to T6)
name
Gets the working mode for a certain REMOTE port (from R1 to R4)
Gets the list of inputs affected by the working mode of a certain
REMOTE port (from R1 to R4)
Gets the list of outputs affected by the working mode of a certain
REMOTE port (from R1 to R4)
49