Assembling And Positioning The Vacuum Cleaner Wall Mounting; Installing The Suction Hose; Installing The Exhaust Pipe - Nilfisk ALTO CENTIX 20 Betriebsanleitung

CENTIX 60
english 3.4.1 Assembling and
positioning the vacuum
cleaner wall mounting
Tips + Tricks:
•
Ensure that the top of the vacu-
um cleaner is easy to remove
and that the filter bag can be
disposed of without problems.
3.4.2 Installing the suction
hose
3.4.3 Installing the exhaust
pipe
14
1. Position the vacuum at a maximum height of approx. 90 cm (see
Tips + Tricks). Adapt the location to your requirements.
2. Notes on installing wall mount: see CENTIX 60 operating instruc-
tions.
1. Insert suction hose into inlet
fitting with 90° sleeve.
2. Attach other end of suction
hose to suction tube system.
If suction hose is not long
enough, lengthen the suction
tube system.
1. Install exhaust fitting to vacuum unit as described in installation
guide provided with exhaust fitting.
2. Attach exhaust hose to exhaust fitting.
3. Attach other end to exhaust tube system. Route tube system to
external wall taking the shortest route.
4. Drill hole on external wall
(diameter 60 mm).
5. Affix blow-out valve to tube
system.
6. Attach blow-out valve to
outside of house with plugs
through the provided holes.