LD Systems IMA 60 Bedienungsanleitung Seite 4

The equilateral triangle with a lightning symbol warns of uninsulated, dangerous voltages inside the device that can cause an
electric shock.
The equilateral triangle with an exclamation mark indicates important operating and maintenance instructions.
Warning! This symbol refers to hot surfaces. Some parts of the housing may get hot during operation. Allow the device to cool for at
least 10 minutes before touching or moving the device after use.
Warning! This device is designed for use at a maximum height of 2000 meters above sea level.
Warning! This device is not suitable for use in tropical climates.
CAUTION! HIGH VOLUMES IN AUDIO PRODUCTS!
This device is meant for professional use. Therefore, commercial use of this equipment is subject to the respectively applicable national accident
prevention rules and regulations. As a manufacturer, Adam Hall is obligated to notify you formally about the existence of potential health risks.
Hearing damage due to high volume and prolonged exposure: When in use, this product is capable of producing high sound-pressure levels (SPL)
that can lead to irreversible hearing damage in performers, employees, and audience members. For this reason, avoid prolonged exposure to
volumes in excess of 90 dB.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
4
WARNING
Never remove the cover as this involves a risk of electric shock. There are no parts inside the device
suitable for repair or maintenance by the operator. Maintenance and repairs must be performed
exclusively by qualified service personnel.