Listening To Music From A Bluetooth Device - Renkforce 2366444 Bedienungsanleitung

- If you cannot find the unit, press and hold the
able. The display will show "PAIR" and you will hear "Pairing" from the unit.
3. Select "RF-SB-301" from the list. When the devices have paired successfully, you will hear "Paired" from the unit,
and the display panel will show "BT".
4. Play music from the connected Bluetooth device.
To disconnect the Bluetooth device, you can:
- Switch to another function on the unit.
- Disable Bluetooth on your Bluetooth device. The Bluetooth device will be disconnected from the soundbar after
the audio prompt.
- Press and hold the
Tips:
• If you are prompted to enter a password, use "0000".
• If no other Bluetooth device pairs with the unit within two minutes, the unit will restore its previous connection.
• The unit will also disconnect when your device is moved beyond the operational range.
• To reconnect your device to the unit, place it within the operational range.
• If the device is moved beyond the operational range, check if the device is still connected to the unit when back
in range.
• If the connection is lost, follow the instructions above to pair your device with the unit.

2) Listening to music from a Bluetooth device

- If the connected Bluetooth device supports Advanced Audio Distribution Profile (A2DP), you can listen to the
music stored on the device through the player.
- If the device also supports Audio Video Remote Control Profile (AVRCP), you can use the player's remote
control to play music stored on the device.
1. Pair your device with the player.
2. Play music via your device (if it supports A2DP).
3. Use the supplied remote control to control playback (if your device supports AVRCP).
- To pause/resume playback, press the
- To skip to another track, press the
or BT button on the remote control.
button on the remote control.
buttons on the remote control.
/
or BT button on the remote control to make the unit discover-
41