7.Basic Opera�on
1.Plug one end of the supplied DP cable into the DP port of your PC. Other
types of connec�on can be used. addi�onal cables not included.
2.Connect the other end of the cable into the monitor corresponding
connector. See the image below.
Power Connector
3.Connect the power cable to your monitor and to an outlet. In case you
cannot reach a wall outlet directly, we recommend to use a surge protector
with adequate voltage.cessible.
4.Press the power bu�on on the monitor to turn it on.
8.lndicator Light
Solid blue light indicates power is on and the monitor is opera�ng normally.
Flashing blue light indicates no video source, no horizontal or ver�cal signal
has been detected or power is low. Please ensure your computer is on and all
video cables are fully inserted and / or connected.
DP Connectors
Audio Output Connector
Eng-6
HDMI Connectors
Indicator light