EOS Invisio XL Montage- Und Gebrauchsanweisungen Seite 27

5. Load the sauna rocks
• Wash the supplied rocks thoroughly
under clear water.
• Make sure the heater stands in its nal
position.
• Load the rocks in the rock store. Do not
insert the rocks too tight, leave spaces
between them to allow the air circulation.
The store takes up to 75 kg. See Fig. 4.
• Do not use the heater without
rocks! Fire risk!
• Observe the instruction given in chaper
„Sauna rocks" on page 29.
6. Turn the gutter around (decline side
change)
• The decline of the gutter should lead
away from the water-splash funnel con-
nection.
• Unscrew 4 screws on both sides (Fig. 5)
• Lift the gutter up and turn it around.
• Set the gutter back into position and
fasten it with 4 screws.
Rock store
All manuals and user guides at all-guides.com
Fig. 4
Water splash gutter
Fixation screws
7. Install the water-splash funnel (Abb. 6)
• Insert the supplied connector (angled
tube piece) into the hole above the gutter
on the side wall of the heater. Make sure
it sits tightly.
• Mount the funnel at the suitable place
to the sauna wall or partition wall with
2 screws.
• Pay attention that the funnel should be
placed well above the gutter level.
• The mounting place of the fun-
nel should exclude the risk of its
accidental touching because it may be
very hot! Risk of burning!
• Connect the funnel and the connector
with the silicone tube. The tube should
decline to the connector, the contact with
the heater must be avoided.
GB
Fig. 5
27