Hilti PM 2-LG Original Bedienungsanleitung Seite 24

2.5 Laser classification for Class 2 laser products
The product corresponds to Laser Class 2 in accordance with IEC ⁄ EN 60825­1:2014 and in accordance with
CFR 21 § 1040 (FDA). This product may be used without need for further protective measures. Nevertheless,
as with the sun, do not look directly into the light source. If you do inadvertently look into the laser beam,
immediately close your eyes and move your head clear of the laser beam. Do not aim the laser beam at
persons.
2.6 Careful handling and use of batteries
▶ Remove the batteries from the product if it is to remain unused for a lengthy period of time. Batteries can
corrode and self-discharge during prolonged storage.
▶ Make sure that batteries are inaccessible to children.
▶ Do not mix old and new batteries. Always replace all batteries at the same time. Do not mix batteries of
different makes or types.
▶ Do not use damaged batteries.
▶ Use only the battery type intended for this product. Use of other batteries may create a risk of injury and
fire.
▶ When changing batteries, make sure that polarity is correct. There is a risk of explosion.
▶ Do not allow batteries to overheat and do not expose them to fire. Batteries can explode and release
toxic substances.
▶ Do not attempt to charge non-rechargeable batteries.
▶ Do not solder batteries into the product.
▶ Do not discharge batteries by short-circuiting. Batteries can develop a leak, explode, catch fire and injure
persons.
▶ Do not damage batteries and do not attempt to take batteries apart. Batteries can develop a leak,
explode, catch fire and injure persons.
3 Description
3.1 Product overview
3.2 Intended use
The product described is a self-leveling line laser designed for leveling and alignment work. The line laser
projects two green lines (horizontal and vertical) and one line intersection point. The line laser can be
operated by one person. The lines and line intersection of the lines have a range of approx. 20 m (65 ft).
Range depends on the brightness of ambient light. The product is designed for indoor use.
Possible applications are: leveling power outlets, cable trays, radiators and other items in installation work;
leveling suspended ceilings; leveling and aligning doors and windows; transferring heights; vertical alignment
of pipes.
16 English
1
Battery compartment
@
Charge state indicator
;
Receiver mode button
=
Line mode button
%
Laser exit window
&
Mounting thread
(
Selector switch for ON / OFF and lock / un-
)
lock pendulum
Eye for attaching the retaining strap
+
Position of rating plate
§
2341494
*2341494*