Explanation Of Warning Symbols And Notes; Package Contents; Safety Instructions - Hama P2 Bedienungsanleitung

G Operating instruction
Thank you for choosing a Hama
product.
Take your time and read the following instructions
and information completely.
Please keep these instructions in a safe place for
future reference.

1. Explanation of warning symbols and notes

Risk of electric shock
This symbol indicates a risk of electric shock
from touching product parts carrying hazardous
voltage.
Warning
This symbol is used to indicate safety instructions
or to draw your attention to speci c hazards
and risks.
Note
This symbol is used to indicate additional
information or important notes.

2. Package contents

• Power strip
• These operating instructions

3. Safety instructions

• Use the product only for the intended purpose.
• Do not operate the product outside the power
limits speci ed in the technical data.
• Protect the product from dirt, moisture and
overheating and use it in dry environments only.
• Do not use the product in a damp environment
and avoid splashing water.
• Do not continue to operate the product if it is
visibly damaged.
• Do not bend or crush the cable.
• Do not drop the product and do not expose it to
any major shocks.
• Always pull directly on the plug when
disconnecting the cable, never on the cable itself.
• As with all electrical products, this device should
be kept out of the reach of children.
• Dispose of packaging material immediately
in accordance with the locally applicable
regulations.
• Do not modify the product in any way. Doing so
voids the warranty.
• The product is intended for private, non-
commercial use only.
2
• The product is intended only for use inside
buildings.
• Do not use the product in the immediate vicinity
of heaters, other heat sources or in direct
sunlight.
• Only use the article under moderate climatic
conditions.
• Do not use the product in areas in which
electronic products are not permitted.
• Route all cables so that there is no risk of tripping.
• Never connect multiple units of this product
in series.
• The product must only be operated on a supply
network as described on the type plate.
Risk of electric shock
• Do not open the device or continue to operate
it if it becomes damaged.
• Do not use the product if the
AC adapter, the adapter cable or the mains
cable are damaged.
• Do not attempt to service or repair the product
yourself. Leave any and all service work to
quali ed experts.
Warning
• Only operate the product from a socket that
has been approved for the device. The socket
must be installed close to the product and
must be easily accessible.
• Disconnect the product from the power
supply using the On/Off switch – if this is
not available, unplug the power cord from
the socket.
• If using a multi-socket power strip, make
sure that the total power consumption of all
connected devices does not exceed the power
strip's maximum throughput rating.
• If you will not be using the product for a
prolonged period, disconnect it from mains
power.