Placing The Log Set - WANDERS Balsa 100 Bedienungsanleitung

Placing the log set

!
Be sure to place the logs exactly as shown in the example.
Place the wood set (7 pieces), and keep in mind that the logs must be arranged exactly like the example.
First place the rear log, then put the glow wool on the burner, and then arrange the rest of the logs. Once
everything is placed exactly as shown in the pictures, you can fill the gaps with bark (but do not place any bark
or vermiculate granules on the burner.) Then replace the glass pane carefully.
Please make sure not to touch the glass with your fingers. Finger marks burn in the glass.
!
Be sure that the door is correctly closed before igniting the hearth.
Avoid putting a log in front of the pilot flame as this will prevent the main burner from igniting and
!
may result in the accumulation of unburned gases in the hearth. If this happens, you must put off the
pilot flame and contact your installer.
It is prohibited to add any extra ceramic (wooden) logs or other materials to the log set. Using
!
vermiculite granules on the burner is prohibited. It will prevent the hearth from working properly
and can damage the hearth beyond repair. It is strongly recommended that you replace the ceramic
wooden logs only by the same kind of logs produced by WANDERS.
28