EUROM Alutherm Sani Wi-Fi 800 Bedienungsanleitung Seite 28

18. Before installing the brackets on the
Alutherm Sani, double check the orientation
(Figure 9).
19. Lay the device down on a soft steady surface
(Figure 10, pos. 4).
20. Screw and tighten three brackets (Figure 10,
pos. 1) on both sides of the main body
(Figure 10, pos. 5) with a small screw
(Figure 10, pos. 2) using a Phillips screwdriver
(Figure 10, pos. 3).
The lowest bracket is used as a spacer bracket to
keep the distance between heater and the wall.
Figure 11
28
Figure 9
Figure 10