Delay Units - Cameo LUXIS FC Bedienungsanleitung

EDITING USER PRESETS (Edit User Colour)
The eight user presets available in the standalone mode Colour Preset can be edited individually.
Starting from the main display, press MENU to enter the main menu. Use UP and DOWN to select
Edit User Colour and confirm with ENTER. Now use UP and DOWN to select the desired preset
and confirm with ENTER. You can now create an individual colour mix of red, green, blue, amber,
lime and cyan with values ranging from 0 to 255 each (select colour with UP and DOWN, confirm
with ENTER, change value with UP and DOWN, confirm with ENTER).
PLAYBACK LOOP STANDALONE MODE
Starting from the main display, press MENU to enter the main menu. Using UP and DOWN, select
the menu item Stand Alone, confirm with ENTER, then select Playback Loop and confirm
again with ENTER. Now use UP and DOWN to select one of the eight available loops (colour
change programs) for playback and confirm with ENTER. All eight loops can be edited individually
(Main menu -> Edit Loop).
18
Loop Selection of colour
change programs
Loop Sets the delay for slave
Delay units
Loop 1
|
Loop 8
0.0 –
2.0s