cecotec BOLERO AGUAZERO 6400 Bedienungsanleitung Seite 38

ENGLISH
9. Rinse aid indicator
If the rinse aid level is low, the rinse aid indicator will warn you that you must refill the
-
rinse aid compartment.
10. Tablet indicator
Select the tablet indicator when you use combination detergents with salt, rinse aid or
-
other additional elements.
The tablet indicator will turn on and be steady while this function is active.
-
11. Extra hygiene indicator
Select the extra hygiene function to increase the washing temperature for the most
-
hygienic washing operation.
The extra hygiene indicator will light up.
-
12. Medium load indicator
Press the medium load button to select the dishwasher area in which the tableware you
-
wish to wash is located. You can select both baskets, or just the upper or lower basket.
Press the button until the indicator corresponding to the loaded basket lights up.
The medium load indicator will be on while this function is running. The tableware located
-
on other dishwasher areas will not be washed.
13. Energy save indicator
Select the energy save option to allow the machine to open the door at the end of the
-
programme to improve the dry efficiency.
This function also saves energy because the dishwasher works at a lower temperature.
-
14. Extra speed indicator
Select the extra speed function to reduce the programme length and use less water.
-
The extra speed indicator will light up.
-
15. Extra silence indicator
Select the extra silence function to start a quieter operation. This option reduces the
-
washing noise pressure level.
The extra silence indicator will light up.
-
16. Programme phases indicators
The display will show the phase indicator for the corresponding running phase.
-
While the dry phase indicator is on, the machine will be silent according to the selected
-
programme length from 15 to 100 minutes.
NOTE: the child lock is activated or deactivated by holding down the selection button (7)
for about 3 seconds. When it is active, all the indicators will flash and the remaining time
indicator will show 'CL' (4). When it is deactivated, all indicators and 'CL' will flash twice.
74
NOTE: if you press the power button after setting the start delay time and the programme
is running, the delay start time will be cancelled.
NOTE: to save any programme as favourite, press the programme selection button (2)
and the delay start button (3) at any time. To select your favourite programme, hold
down the programme button (2) for 3 seconds.
Energy save mode
1. Open the door and hold down the programme button (2) and the option button (6) at once
for 3 seconds.
2. After 3 seconds, the machine will show the last setting, 'IL1' or 'IL0'.
When the energy save mode is active, the display will show 'IL1'. In this mode, the interior
-
lights (if available) will turn off 2 minutes after opening the door and the dishwasher will
turn off after 15 minutes of inactivity to save energy.
When the energy save mode is deactivated, the display will show 'IL0'. If the energy save
-
mode is deactivated, the interior lights will light up while the door is open and the machine
will stay on unless the user turns it off.
3. To save the last setting you have selected, turn off the dishwasher.
The machine will have the energy save mode setting activated by default.
Changing the running programme
If you wish to change the programme when the dishwasher is operating:
1. Press the Start/Pause button.
2. When the programme ends, select the desired programme with the programme selection
button.
3. Start the new selected programme by pressing the Start/Pause button.
4. The new programme which is running will resume the previous programme in the phase
it was running.
Cancelling a running programme
If you wish to cancel a programme when it is running:
1. Hold down the Start/Pause button for 3 seconds.
2. During cancellation, the end of programme indicator will flash. The machine will drain the
water.
3. When the end of programme indicator lights up, turn off the machine with the power
button.
Turning off the machine
Turn off the machine by pressing the power button after the programme has finished and the
end of programme indicator is on.
ENGLISH
75
AGUAZERO 6400 / 6400 INOX / 6400 DARK