Overmax Multipic 3.6 Bedienungsanleitung Seite 19

Wi-Fi network connection
In the main interface, select Settings (fig. 5) and then Network Settings
(A, fig. 6). Search for the Wi-Fi network you want to connect to, enter your
password, and confirm (fig. 7).
Bluetooth connectivity
In the main interface, select Settings and then Bluetooth Settings (B, fig. 6).
Find an available device to connect to (fig. 8).
Projection settings
• In the main interface, select Settings and then Projection settings (C, fig. 6).
• Depending on the installation method and projector setting, select one
of the available picture settings (fig. 9).
System settings
1.
In the main interface, select Settings, then System updates or Other
settings (D,E, fig. 6).
2.
In Settings you can change the language, restore factory settings and
perform a local or online update (fig. 10).
Multimedia
Insert the external drive into the USB port of the projector. In the main interface,
select a category: Film, Music, Photo or Office and then the file you want to
view (fig. 5).
iOS Cast
1.
From the main interface, select iOS Cast (fig. 11).
2.
Connect the projector and your mobile phone to the same Wi-Fi network,
or connect your iOS device to the projector's wireless access point (AP).
3.
On your iOS device, open the phone's interface, then select "Clone screen"
(A, fig. 12). When the device searches for the projector (B, fig. 12), select
the device with which you want to connect (C, fig. 12).
Miracast
1.
From the main interface, select Miracast (fig. 13).
2.
Connect the projector and mobile phone to the same Wi-Fi network.
3.
Open the screen cloning application of your choice or select this function
on your phone and connect to the device (fig. 13).
EN