Programming Temperature In Celsius Or Fahrenheit - Bresser 70-01101 Bedienungsanleitung

OPERATION
• To select the indoor/ outdoor temperature and humidity mode,
press UP (▲) or DOWN (▼) until the IN icon
beep sound alert.
VIEWING REMOTE (CHANNEL) TEMPERATURE AND HUMIDITY
Static Display:
• Press the CHANNEL button to select measurements from differ-
ent remote sensors, each is MODE to a unique channel 1, 2 or 3.
Channel Auto-Scan Display:
• To enable an automatic scan of all channels, press and hold
CHANNEL, until the
from each remote channel will be alternately displayed with a 5
seconds viewing.
NOTE: the channel auto-scan feature can be active only if there are
more than one remote sensors operating and are MODE to differ-
ent channels.

PROGRAMMING TEMPERATURE IN CELSIUS OR FAHRENHEIT

• Press and hold MODE button for 3 seconds to toggle the tem-
perature unit in Celsius (ºC) or Fahrenheit (ºF).
SETTING TEMPERATURE ALARM
• Press ALARM button selecting the desired alarm, the upper tem-
perature alert with
temperature alert with
• Press and hold ALARM button until the temperature digits fl ash-
ing.
• Adjust the temperature digits using the UP (▲) or DOWN (▼).
Press and hold either button for fast digits advance
• Press the ALARM to confi rm selection and return to the tempera-
ture alarm selection screen
icon is displayed. The measurements
icon (if disabled, displays OFF), or lower
icon (if disabled, displays OFF).
44
fl ashing with a