Connecting The Product With A Motorised Vacuum Cleaner (Not Included); Emptying The Metal Container; Cleaning And Replacing The Pleated Filter - Parkside PASP 18 A1 Bedienungs- Und Sicherheitshinweise

˜ Connecting the product with
a motorised vacuum cleaner
(not included)
Secure the container lid
container with the latches
[ 10 ]
For the following steps, you need a motorised
vacuum cleaner and the associated hose
(Fig . B):
– Attach the hose adapter that belongs to
the hose of the motorised vacuum cleaner
(not included) with the external vacuum
connector .
[ 2 ]
– Connect the other end of the hose to the
motorised vacuum cleaner .
– The motorised vacuum cleaner now serves
as an external suction power source for the
product .
m WARNING! Follow the operation procedures,
including the illustrations of the motorised
vacuum cleaner's instruction manual .
˜ Emptying the metal container
Remove the container lid
container (see "Fixing and removing the
10 ] [
container lid") . Empty the metal container .
m WARNING!
Empty and clean the product before and
u
after use to avoid the collection of materials
that could pose a fire hazard in the vacuum
cleaner .
to the metal
1 ] [
.
11 ] [
from the metal
1 ] [
˜ Cleaning and replacing the
pleated filter
When the suction power of the product
decreases, clean the pleated filter
Removing the pleated filter
Fig . C
Remove the container lid
container (see „Fixing and removing the
[ 10 ]
container lid") .
Turn over the container lid
Hold the pleated filter
pleated filter in an anticlockwise direction .
Lift the pleated filter
mesh out of the product .
13 ] [
Take the pleated filter
mesh .
[ 13 ]
Cleaning the pleated filter
NOTE
Never clean the pleated filter
u
You would otherwise damage the pleated
filter .
Shake the pleated filter
pleated filter gently on the floor .
.
[ 12 ]
from the metal
1 ] [
.
[ 1 ]
by the rim . Turn the
[ 12 ]
together with the wire
[ 12 ]
out of the wire
[ 12 ]
with water .
12 ] [
. If necessary, tap the
[ 12 ]
GB/IE 21