Disconnect/Interrupt A Bluetooth Connection; Using A Single Earphone - Silvercrest STWSK 3 A1 Bedienungsanleitung

7.4 Disconnect/interrupt a Bluetooth connec-
tion
• If you place the earphones 1/6 in the charging box 12 or
switch them off, the connection to the audio device is tem-
porarily interrupted.
• In order to permanently disconnect the Bluetooth system
from the audio device, delete all STWSK 3 A1 entries in
the device list on the player.

7.5 Using a single earphone

You can also use each earphone separately.
1. Take the desired earphone 1/6 out of the charging
box 12 and leave the other one in the charging box in
order to prevent the two earphones from pairing.
2. Wait until the LED 3 or 4 of the earphone flashes red/
white. Place the earphone 1 or 6 in your ear.
3. Start the Bluetooth connection on the audio device (e.g.
smartphone, MP3 player). The audio device should now
receive the device identifier STWSK 3 A1.
4. Establish the connection to the earphone on the audio device.
5. Now start the playback of a music track on the audio
device. The sound is reproduced via the earphone 1/6.
NOTES:
• If you use only one earphone 1/6, some functions are not
available during operation. These can then only be con-
trolled via the audio device.
• If you want to use both earphones on different audio
devices, switch off the other earphone while pairing with
the audio device, as otherwise both earphones will pair
with each other again.
41
GB