How To Proceed If A Repair Is Necessary; Dismount; Dismounting Steps; Disposal - SICK LFC Betriebsanleitung

Out of specification
Red signal lamp flashes
Error Cause
S600 Electronics
temperature
too high
S604 Overload on
output
Function check
Red signal lamp flashes
Error Cause
C700 Simulation
active
7.4 How to proceed if a repair is
necessary
You can find an instrument return form as well
as detailed information about the procedure in
the download area of our homepage. By doing
this you help us carry out the repair quickly and
without having to call back for needed informa-
tion.
Proceed as follows in case of repair:
•
Print and fill out one form per instrument
•
Clean the instrument and pack it damage-
proof
•
Attach the completed form and, if need
be, also a safety data sheet outside on the
packaging
•
Ask the agency serving you to get the
address for the return shipment. You can find
the agency on our homepage.
8

Dismount

8.1

Dismounting steps

To remove the device, carry out the steps in
chapters " Mounting" and " Connecting to power
suplly" in reverse.
Warning:
When dismounting, pay attention to the
process conditions in vessels or pipe-
LFC • Transistor with IO-Link
Rectification
Error in the electronics
Allow device to cool down
and restart
If the error occurs again,
check the ambient tempe-
rature
Switching output overloaded
Check electrical connection
Reduce switching load
Rectification
Terminate simulation mode
lines. There is a risk of injury, e.g. due
to high pressures or temperatures as
well as aggressive or toxic media. Avoid
this by taking appropriate protective
measures.
8.2

Disposal

Pass the instrument on to a specialised recy-
cling company and do not use the municipal
collecting points.
Remove any batteries in advance, if they can be
removed from the device, and dispose of them
separately.
If personal data is stored on the old device to be
disposed of, delete it before disposal.
If you have no way to dispose of the old instru-
ment properly, please contact us concerning
return and disposal.
9 Certificates and approvals
9.1 Food and pharmaceutical
certificates
Versions for use in the food and pharmaceutical
industries are available or in preparation for the
device or the device series.
The corresponding certificates can be found on
our homepage.
9.2

EU conformity

The device fulfils the legal requirements of the
applicable EU directives. By affixing the CE
marking, we confirm the conformity of the instru-
ment with these directives.
The EU conformity declaration can be found on
our homepage.

9 Certificates and approvals

25