Inspecting; Drying; Storage - Pari VORTEX 051 Gebrauchsanweisung

4.6 Inspecting

Inspect all product components after each cleaning and disin-
fection. Replace any broken, deformed or seriously discoloured
parts.

4.7 Drying

After each cleaning and disinfection, place all components on a
dry, clean and absorbent surface, and let them dry completely.
The inhalation chamber can be dried with a clean, lint-free
cloth.

4.8 Storage

Store the VORTEX and the accessories, if applicable, as de-
scribed below:
• When it has dried completely, push the mouthpiece into the
inhalation chamber.
• Place the protective cap over the mouthpiece.
• Store the product and the accessories, if applicable, in a
dry, dust-free place.
– 30 –